Amusement park industry is a recreational field that is based on modern industrial facility. This industry entertains people by its thrilling facilities. Amusement parks around the world draw visitors and people keep returning for the laughter and scream they provides. And many of the entertainment facilities need rotary transmission of both power and signals, therefore slip rings need to be installed. JINPAT Electronics, as an established slip ring manufacturer, provides slip ring solutions not only for the heavy industry but also for the recreational industry.
Among slip rings designed for the amusement facilities, there are models based on capsule slip rings and through bore slip rings for small and medium size facilities. And as for facilities that are in large size and have higher demand in terms of power capacity, JINPAT also have large volume slip rings specially designed for them. The custom slip rings for large amusement facilities are integrated carbon brush slip rings. These slip rings consist of power module and signal module. The power module is a carbon brush structure slip ring that can endure high voltage and cater high power while the signal module integrates small size signal slip rings.
Now, we will be looking into some representative custom carbon brush slip rings. To begin with, LPA000-03300-02150-0230-E3 is large current slip ring. In the power unit, there are 3 300A channels and 2 150A channels while the signal module integrates 2 30A channels and 1 Gigabit Ethernet channel. This is a typical slip ring that is compatible with computer signals. The working voltage reaches up to 380VAC. The technical challenge lies in riding of the interference between signals and power. JINPAT Electronics with strong technical strength and sufficient experiences, manages to solve this problem and comes up with large current slip rings without interference and therefore ensure a reliable and safe power and signal transmission.
The above mentioned slip ring has 5 channels in the power unit, and JINPAT Electronics has another solution with same working voltage but has high power capacity. The model is coded LPA000-14500-1250-0902-02E3. You can also see there are 2 Gigabit Ethernet channels. It transmits larger current and to make this possible, this large current slip ring has a much larger volume. The diameter is 520mm and to cater 14 500A channels, its height reaches 2295mm. Those of LPA000-03300-02150-0230-E3 is 380mm and 390mm respectively.
Aside from the two slip ring models, JINPAT Electronics also has a slip ring with smaller figure. JINPAT LPT000-03200-0415-0802-E3 is a through bore slip ring with a height of 324mm and a diameter of 135mm. There are 3 200A power channels and the carbon brush unit is at 380VAC. The weak electrical signal part integrates 4 15A channels and 8 2A channels and 1 Gigabit Ethernet channel. Among them, the 2A channels support mixed transmission of power and signals.
Our slip rings have to go through a series of vigorous test before delivery, and they are very stable and reliable. JINPAT Large Current Slip Rings are surely a reliable solution for amusement facilities that demand high power transmission and great reliabilities.