video
    video
  • 1/2

Pancake Slip Rings

Number of Circuits 1~10 circuits
Current 5A/Signal
Insulation Resistance ≥500MΩ@500VDC
Wire Length rotor/stator:300mm
Voltage 240VAC/DC
Dielectric Strength 500VAC@50Hz (power) 300VAC@50Hz (signal)
Consult immediately
Model ListInstallationReview(0)

This series is divided into an integrated pancake slip ring and a separate pancake slip ringThe integrated pancake slip rings provide vias of different size; the separate pancake slip ring consists of a separate rotor and a stator to meet more stringent height requirements, and   can be   installed by the customer according to the application environment.


Features:

Minimum thickness up to 5.4m

Transmit analog and digital signal

The power and signal are mixed transmitted, and the signal categories are as follows:

◎Ethernet: Rate (10Mbps/100Mbps/1000Mbps)

◎Industrial Ethernet: ProfiNet, Powerlink, SercosIII, EtherCAT, EtherNet/IP, etc.

◎HD video: SDI, LVDS, etc.

◎Serial communication: RS232, RS485, RS422, etc.

◎Universal Serial Bus: USB2.0

◎Industrial Fieldbus: CANBus, CC-Link, InterBus, DeviceNet, ProfiBus, etc.

◎Sensor signal: thermal resistance, thermocouple, strain gauge, etc.

◎Shock-resistant, maintenance-free


Main Applications:

◎ Military Equipments

◎ Medical Equipments

◎ Wind Turbine

◎ Test Equipment

◎ Revolving Door

◎ Robot


LPKS Pancake Slip Rings
Model

Number of

Circuits

Voltage

(AC/DC)

Current

(A)

OD*Length

(L)/(mm)

(ID)(mm)

Reference Circle

(D)/(mm)

Details
LPKS005-01051240V5Ф34×7530详情.png
LPKS005-02052240V5Ф42×7538详情.png
LPKS005-03053240V5Ф52×7546详情.png
LPKS005-04054 240V5Ф60×7554详情.png
LPKS005-05055240V5Ф68×7563详情.png
LPKS005-06056240V5Ф76×7570详情.png
LPKS005-07057240V5Ф84×7578详情.png
LPKS005-08058240V5Ф92×7586详情.png
LPKS005-09059240V5Ф100×7594详情.png
LPKS005-100510240V5Ф108×75102详情.png
LPKS019-09059240V5Ф108×719102详情.png
LPKS028-08058240V5Ф108×728102详情.png
LPKS036-07057240V5Ф108×736102详情.png
LPKS045-06056240V5Ф108×745102详情.png
LPKS053-05055240V5Ф108×753102详情.png
LPKS061-04054240V5Ф108×761102详情.png
LPKS069-03053240V5Ф108×769102详情.png
LPKS076-02052240V5Ф108×776102详情.png
LPKS084-01051240V5Ф108×784102详情.png



Installation Instructions of Separate Pancake Slip Ring

1. First install the rotor side. Fix the rotor PCB board to the flange of the device with the corresponding screws;

2. Then install the stator side. Fix the stator PCB board to the flange of the device with the corresponding screws;

3. Debug the coaxiality of the slip ring. The brush shrapnel contacts on the stator side must be adjusted to the center of the rotor side ring to ensure the coaxiality between the slip ring and the device;

4. Debug the distance between the two PCB boards. The distance between the stator side PCB board and the rotor side PCB board is L (+0.1/+0.3) mm.


slipringjs-j.png

Comment

comment
name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    submit